RPZ INSPECTIONS & TESTING IN FORT WORTH
Certified high-hazard backflow prevention, testing, and maintenance for commercial and industrial facilities across Texas.
Schedule
Compliance
Protocols
RPZ Inspection &
Testing Standards
Installation Mandates
- Device must be installed in an area not subject to flooding or freezing conditions.
- Minimum clearance of 12 inches is required from the floor to the relief valve port.
- Installation must allow for 24-inch unobstructed access for testing and maintenance.
- RPZ assemblies must be installed in a horizontal orientation unless approved otherwise.
- Testing is legally mandated upon installation and annually by a certified backflow tester.
Step-by-Step Inspection
- 01 SITE ASSESSMENT: Identify RPZ assembly location and verify serial number data.
- 02 PRESSURE TEST: Measure the pressure differential across the first check valve.
- 03 RELIEF VALVE: Verify the opening point of the relief valve at minimum 2.0 PSID.
- 04 CHECK VALVE 2: Inspect the second check valve for tight seating against backpressure.
- 05 CERTIFICATION: Record all technical data and submit digital reports to authorities.
Check Valve 11.0 PSID
Check Valve 22.2 PSID
Relief ValvePass
Frequently Asked Questions
SCHEDULE YOUR RPZ INSPECTION
(817) 635-0100 | Ensure your property remains compliant and safe with our certified backflow testing. Our licensed technicians provide fast, reliable inspections and same-day certification reports.
Backflow Fort Worth provides specialized commercial backflow testing, annual RPZ inspections, and compliance support for property managers and facility directors across Tarrant County.
Quick Links
Our Services
- Annual Backflow Testing
- Commercial RPZ Inspections
- Irrigation Backflow Testing
- Backflow Repair & Replacement
- Compliance Documentation
- Facility Compliance Support
Connect With Us
Commercial Compliance
Specialists
Specialists
© 2026 Backflow Fort Worth. All rights reserved. Professional Backflow Testing for Tarrant County.